Click image to view full size image
Sanitary penumatic butterfly valve:
1)Material: AISI304, AISI316L
2)Size: DN25-200, 1"-8"
3)Standards: DIN/SMS/ISO/3A
Application: This sanitary type, pneumatic or manual operated butterfly valves are suitable for
All kinds of stainless steel pipeline system.
Advantages: (1)Imported seals: A. Paeesd FDA certification B. Better acid proof, alkali proof and high temperature performance; C Less permanent compressive deform. (2)Investment forging valve plug: Pressure durability ≤ 1.2Mpa(3)Metalllographic structure better than casting ones.
4)Apparent design: In the same step with international fashion-style. (5)Service life: The same as imported butterfly valve; 18 qualityguarantee on seal under normal circumstance. (6)Cost performance: Import substituted, cost saved, reliable operation.
Material: (1)Material Contact Parts: AISI304 or AISI316L;
(2)sealing material: Standard EPDM, SILICON, FDM, HNBR for option
Joint style: (1)weld, thread, clamp, weld/thread, flange; (2)o assure the connection and substitution with pipe or equipmentare made to DIN 11850, IDF/ISO, SMS, international standard size.
Handle: (1)standard: Plastic handle, Metal handle;
(2)option: Adjustable handle
Technical parameter:
OD Range: DN25-DN200 or 1"-8"
Anti-pressure: 10bar
Compressed air supply: Min: 4bar; Max: 8ba
Penumatic actuator torgne: 40Nm
Finish: Cutting: Ra 1.6-3.2µ M
Polish: Ra0.4-0.8µ M
Requirements for compressed air quality
That the executor needs:
Compressed air joint: Air pipe equiped
Equips with air adapter R18/8
Max grain size: 0.01mm
Max oil content: 0.08ppm
Dew point: 10° C or less
Max water content: 7.5g/kg
Penumatic actuator features:
NO spring open/penumatic off
NC spring open/penumatic open
ON/OFF signal feed back inductive prober for option
Compact appearance, small volume, large torgue
1)Material: AISI304, AISI316L
2)Size: DN25-200, 1"-8"
3)Standards: DIN/SMS/ISO/3A
Application: This sanitary type, pneumatic or manual operated butterfly valves are suitable for
All kinds of stainless steel pipeline system.
Advantages: (1)Imported seals: A. Paeesd FDA certification B. Better acid proof, alkali proof and high temperature performance; C Less permanent compressive deform. (2)Investment forging valve plug: Pressure durability ≤ 1.2Mpa(3)Metalllographic structure better than casting ones.
4)Apparent design: In the same step with international fashion-style. (5)Service life: The same as imported butterfly valve; 18 qualityguarantee on seal under normal circumstance. (6)Cost performance: Import substituted, cost saved, reliable operation.
Material: (1)Material Contact Parts: AISI304 or AISI316L;
(2)sealing material: Standard EPDM, SILICON, FDM, HNBR for option
Joint style: (1)weld, thread, clamp, weld/thread, flange; (2)o assure the connection and substitution with pipe or equipmentare made to DIN 11850, IDF/ISO, SMS, international standard size.
Handle: (1)standard: Plastic handle, Metal handle;
(2)option: Adjustable handle
Technical parameter:
OD Range: DN25-DN200 or 1"-8"
Anti-pressure: 10bar
Compressed air supply: Min: 4bar; Max: 8ba
Penumatic actuator torgne: 40Nm
Finish: Cutting: Ra 1.6-3.2µ M
Polish: Ra0.4-0.8µ M
Requirements for compressed air quality
That the executor needs:
Compressed air joint: Air pipe equiped
Equips with air adapter R18/8
Max grain size: 0.01mm
Max oil content: 0.08ppm
Dew point: 10° C or less
Max water content: 7.5g/kg
Penumatic actuator features:
NO spring open/penumatic off
NC spring open/penumatic open
ON/OFF signal feed back inductive prober for option
Compact appearance, small volume, large torgue